![]() |
2016/2017 Postgraduate Application |
The Federal University of Technology, Owerri (FUTO) Postgraduate Admission application for 2016/2017 academic session has commenced. All candidates seeking admission into any of the FUTO Postgraduate School Programmes are advised to apply before the deadline of registration.
FEDERAL UNIVERSITY OF TECHNOLOGY, OWERRI, POSTGRADUATE SCHOOL
FEDERAL UNIVERSITY OF TECHNOLOGY, OWERRI, POSTGRADUATE SCHOOL
2016/2017 POSTGRADUATE APPLICATION
A. The Postgraduate School, Federal
University of Technology, Owerri (FUTO) invites applications from suitably qualified
candidates for consideration for admission into the underlisted Diploma, Masters and
Doctorate Degree programmes for the 2016/2017 session under Regular, Centre for
Continuing Education (CCE), Institute of Women/Gender and Development Studies
(IWoGDS) and Institute of Erosion Studies.
Any interested candidate should pay a non-refundable fee of eleven thousand, three hundred naira (N11,300.00) only at any of the Deposit Money Banks (DMB) through the Remita Gateway on the Postgraduate application platform and then complete the online application at www.futo.edu.ng.
Any interested candidate should pay a non-refundable fee of eleven thousand, three hundred naira (N11,300.00) only at any of the Deposit Money Banks (DMB) through the Remita Gateway on the Postgraduate application platform and then complete the online application at www.futo.edu.ng.
B. ADMISSION REQUIREMENTS FOR FUTO POSTGRADUATE APPLICATION
All candidates applying for any of
the following postgraduate programmes must satisfy THE basic matriculation requirements
including English LANGUAGE and Mathematics as required by the Department.
1. POSTGRADUATE DIPLOMA (PGD)
Candidates applying for the
Postgraduate Diploma (PGD) programme must possess any of the following in addition to
English and Mathematics and the basic Matriculation requirements of the Department:
i) Higher National Diploma (HND)
Upper Credit or above.
ii) Bachelors Degree in the relevant
discipline from FUTO or any other recognised University with at least a Third
Class Honours.
iii) A good Bachelors Degree with at
least Second Class Honours in other related disciplines.
2. M.Sc, M.Eng, MPH
Candidates applying for the M.Sc,
M.Eng, MPH programme must possess any of the following in addition to English and
Mathematics and the basic Matriculation requirements of the Department:
i) A first degree with at least a
second class honours qualification with a minimum of 3.00 CGPA on a 5-point scale or 2.50
CGPA on a 4-point scale in the related area from FUTO or from any other
recognized University.
ii) A Bachelors degree from a
recognized University plus a PGD of not less than 3.50 CGPA on a 5-point scale and a 3.00
CGPA on a 4-point scale in the relevant area.
3. MBA
Candidates applying for the MBA
programme must possess any of the following in addition to English and Mathematics
and the basic matriculation requirements of the Department:
i) A good honours Degree in the area
of Science and Technology, Engineering and Management Technology from FUTO or
from any other recognized University.
ii) Graduates with first degree from
a recognized University and holders of Higher National Diploma (HND) with
Postgraduate Diploma may apply for the MBA programme.
4. Ph.D
Candidates applying for the Ph.D
programme must possess any of the following in addition to English and Mathematics
and the basic matriculation requirements of the Department:
i) A Master’s degree with a CGPA of
4.00 on a 5.00 point scale or 3.0 on a 4.0 point scale or its equivalent in the
relevant areas from FUTO or any recognised University.
ii) Any other qualification as the
University Senate may from time to time recognise or approve.
C. DURATION OF PROGRAMMES
i) Ph.D Programmes: A minimum of six
(6) semesters and a maximum of ten (10) semesters for full-time and minimum
of eight (8) semesters and a maximum of fourteen (14) semesters for
part-time students.
ii) M.Sc, M.Eng, MPH and MBA
Programmes: A minimum of three (3) semesters and a maximum of six (6) semesters
for full-time and minimum of four (4) semesters and a maximum of eight (8)
semesters for part-time students.
iii) PGD Programmes: A minimum of
two (2) semesters and a maximum of four (4) semesters for full-time and minimum
of four (4) semesters and a maximum of six (6) semesters for part-time
students.
NOTE: Candidates with Bachelor or Master’s degree in Education (B.Ed and M.Ed) need not apply.
D. METHOD OF APPLICATION FOR FUTO POSTGRADUATE ADMISSION
Candidates are advised to apply
on-Iine following the procedure given below:
- Go to the FUTO Website - www.futo.edu.ng.
- Click on Prospective Students.
- Go to PG Application Form 2016/2017.
- Click on on-Iine application for PG (Regular) or CCE (PG) Weekend Programme or Institute of Women/Gender and Development Studies or Institute for Erosion Studies application.
- Click on generate 2016/2017 PG Application Invoice.
- Enter your Telephone Number.
- Click on Sign In.
- Print your invoice containing your RRR number (Remita Retrieval Reference) and proceed to the bank for payment or make payment via ATM card.
- Go to any bank with your invoice and pay a non-refundable fee of Eleven thousand three hundred naira (N11,300.00) for FUTO PGS or CCE or IWoGDS or IE8 application depending on your interest.
- Return to point 4 above.
- Click on Fill PG Application form 2016/2017.
- Enter your Remita Number from the bank.
- Fill the on-Iine form accordingly.
- Print out a copy of the Acknowledgement Slip when the form is completed. Also an acknowledgement would be sent to the email address you provided while filling the form. Therefore make sure you provide a valid personal e-mail address.
For more enquires send an email to
ict@futo.edu.ng
E. DOCUMENTS TO UPLOAD TO THE PG SCHOOL
PORTAL
Candidates should upload the
following relevant documents in support of their application online.
- University Degree Certificates or Statement of Result.
- NYSC Discharge Certificate or Exemption Certificate.
- “0” Level Result
F. SUBMISSION OF ACADEMIC TRANSCRIPT:
All applicants must forward their
transcript to reach the Deputy Registrar / Secretary, Postgraduate School, Federal
University of Technology, Owerri, Imo State, Nigeria, not Internet than December 20, 2016.
Please note that any application
without Transcript will not be considered for admission.
CLOSING DATE:
The website will close on November
30, 2016 and all submission of documents as in 'E' above will close on same day. All
successful candidates will be notified via email and SMS.
AVAILABLE POSTGRADUATE PROGRAMMES IN FUTO
1.0 SCHOOL OF AGRICULTURE AND
AGRICULTURAL TECHNOLOGY (SAAT)
1.1 DEPARTMENT OF AGRICULTURAL
ECONOMICS
a) M.Sc. and Ph.D Degrees in
Agricultural Economics with specialization in:
- Farm Management and Production Economics
- Agricultural Development and Policy
- Agricultural Marketing and Cooperatives
- Agricultural Finance
- Agricultural Project Planning and Analysis
- Agricultural Resources and Environmental Economics.
b) PGD in Agricultural Economics
1.2 DEPARTMENT OF AGRICULTURAL
EXTENSION
a) M.Sc. and Ph.D Degrees in
Agricultural Extension with specialization in:
- Agricultural Extension Administration
- Programme Planning and Evaluation
- Rural Sociology
- Agricultural Extension Communication
- Community and Rural Development
- Indigenous Knowledge Systems in Agricultural and Rural Development
b) PGD in Agricultural Extension
1.3 DEPARTMENT OF ANIMAL SCIENCE AND
TECHNOLOGY
a) PGD, M.Sc. and Ph.D Degrees in
Animal Science and Technology with specialization in:
- Animal Breeding and Genetics
- Animal Management
- Animal Nutrition
- Animal Products
- Reproductive Physiology
b) PGD in Animal Science and
Technology
1.4 DEPARTMENT OF CROP SCIENCE AND
TECHNOLOGY
a) M.Sc and Ph.D Degrees in Crop
Science and Technology with specialization in:
- Agronomy
- Seed Technology
- Plant Breeding and Genetics
- Farming Systems
- Crop Physiology
- Horticulture and Landscaping
- Crop Protection with options in the following: (i) Mycology (ii) Nematology (iii) Weed Science (iv) Agricultural Entomology (v) Bacteriology (vi) Virology
b) PGD in Crop Science and
Technology
1.5 DEPARTMENT OF SOIL SCIENCE AND
TECHNOLOGY
a) M.Sc. and Ph.D. Degrees in Soil
Science and Technology with specialization in:
- Soil Science
- Soil Genesis and Classification
- Soil Physics/Soil Conservation
- Soil Survey and Land-use Planning
- Soil Microbiology
- Soil Fertility
- Soil Chemistry
- Soil and Environmental Management
b) PGD in Soil Science and
Technology
1.6 DEPARTMENT OF FISHERIES AND
AQUACULTURE TECHNOLOGY
a) M.Sc. in Fisheries and Aquaculture
b) Ph.D. in Fisheries and Aquaculture
c) PGD in Fisheries and Aquaculture
2.0 SCHOOL OF ENGINEERING AND
ENGINEERING TECHNOLOGY (SEET)
2.1 DEPARTMENT OF AGRICULTURAL and
BIO-RESOURCES ENGINEERING
a) M.Eng and Ph.D. Degrees in Agricultural
Engineering with specialization in:
- Farm Power and Machinery Engineering Technology
- Soil and Water Engineering Technology
b) PGD in Agricultural Engineering
(Note: Only candidates with 3rd class are qualified
for PGD in Agricultural Engineering)
2.2 DEPARTMENT OF CHEMICAL ENGINEERING
a) Ph.D Degree in Chemical Engineering
with options in:
- Chemical Reaction Engineering
- Process Plant Design
- Refinery/Gas Engineering
- Separation Processes
- Simulation and Optimization
- Systems Dynamics and Control
- Chemical Engineering Thermodynamics
b) M.Eng. in Chemical Engineering
c) PGD in Chemical Engineering
2.3 DEPARTMENT OF CIVIL ENGINEERING
a) M.Eng. and Ph.D Degrees in Civil
Engineering with specialization in:
- Water Resources Engineering
- Structural Engineering
- Public Health Engineering
b) PGD in Civil Engineering only
2.4 DEPARTMENT OF ELECTRICAL AND
ELECTRONIC ENGINEERING
a) M.Sc. and Ph.D Degrees in Electrical
and Electronic Engineering with specialization in:
- Electronic Power Engineering
- Communication Engineering
- Control Engineering
- Electronic and Computer Engineering
b) PGD in Electrical and Electronic
Engineering
2.5 DEPARTMENT OF FOOD SCIENCE AND
TECHNOLOGY
a) M.Sc. and Ph.D Degrees in Food
Science and Technology with specialization in:
- Food Microbiology
- Food Chemistry and Nutrition
- Beverage and Brewing Technology
- Food Processing Technology
b) PGD in Food Science and Technology
2.6) DEPARTMENT OF MATERIALS AND
METALLURGICAL ENGINEERING
a) M.Eng. and Ph.D Degrees in Materials
and Metallurgical Engineering with specialization in:
- Materials Engineering
- Metallurgical Engineering
2.7) DEPARTMENT OF MECHANICAL ENGINEERING
a) M.Eng. and Ph.D Degrees in
Mechanical Engineering with specialization in:
- Industrial Production Engineering
- Energy and Power Engineering
- Automated Design and Manufacturing
2.8 DEPARTMENT OF PETROLEUM ENGINEERING
a) M.Eng. and Ph.D Degrees in Petroleum
Engineering with specialization in:
- Reservoir Engineering
- Production Engineering
- Drilling Engineering
- Natural Gas Engineering
- Petroleum Economics
b) PGD in Petroleum Engineering
2.9 DEPARTMENT OF POLYMER AND TEXTILE
ENGINEERING
a) M.Sc. and Ph.D Degrees in Polymer
and Textile Engineering with specialization
- M.Sc. in Polymer Science and Engineering
- M.Sc. in Textile Science and Engineering
- Ph.D in Polymer Science
- Ph.D in Textile Science
3.0 SCHOOL OF MANAGEMENT TECHNOLOGY
(SMAT)
3.1 DEPARTMENT OF PROJECT MANAGEMENT
TECHNOLOGY
a) Ph.D, M.Sc. and MBA in Project
Management Technology with specialization in:
- Construction Technology
- Manufacturing Systems
- Industrial Process Technology
b) PGD with options in:
- Construction Technology
- Manufacturing Systems
3.2 DEPARTMENT OF MANAGEMENT TECHNOLOGY
a) PGD, MBA, M.Sc. and Ph.D Degrees in:
- Financial Management Technology
- Management Technology
3.3 DEPARTMENT OF TRANSPORT MANAGEMENT
TECHNOLOGY
a) MBA, M.Sc. and Ph.D Degrees in Transport Management Technology with
specialization in:
- Aviation Management
- Transport Planning and Management
- Maritime Management Technology
b) MBA options:
- Sea Transport Management
- Air Transport Management
- Transport Management
- Logistics Management
c) PGD in Transport Management
Technology
3.4 DEPARTMENT OF MARITIME MANAGEMENT
TECHNOLOGY
a) MBA, M.Sc. and Ph.D Degrees in
Maritime Management Technology
b) M.Sc. options:
- Maritime Economics and Finance
- Marine Transport Management
c) PGD in Maritime Management
Technology
3.5 DEPARTMENT OF INFORMATION MANAGEMENT
TECHNOLOGY
a) PGD, MBA, M.Sc. and Ph.D Degrees in
Information Management Technology
4.0 SCHOOL OF ENVIRONMENTAL SCIENCES
(SOES)
4.1 DEPARTMENT OF ENVIRONMENTAL
TECHNOLOGY
a) M.Sc. and Ph.D Degrees in
Environmental Technology with specialization in:
- Pollution Control Technology
- Flood and Erosion Control Technology
- Geo-Environmental Technology
b) PGD in Environmental Technology
5.0 SCHOOL OF BIOLOGICAL SCIENCES (SOBS)
5.1 DEPARTMENT OF BIOLOGY
a) M.Sc and Ph.D degrees in Biology
Science with specialization in
- Applied Entomology and Parasitology
- Environmental Conservation and Management
- Mycology and Plant Pathology
b) PGD in Biological Science
5.2 DEPARTMENT OF BIOTECHNOLOGY
a) M.Sc. and Ph.D Degrees in
Biotechnology with specialization in:
- Biotechnology
- Environmental Health Biology
5.3 DEPARTMENT OF MICROBIOLOGY
a) M.Sc. and Ph.D Degrees in
Microbiology with specialization in:
- Food/Industrial Microbiology
- Medical Microbiology
- Environmental Microbiology
b) PGD in Applied Microbiology
5.4 DEPARTMENT OF BIOCHEMISTRY
a) M.Sc. and Ph.D Degrees in
Biochemistry with specialization in:
- Industrial Biochemistry
- Environmental Biochemistry
- Medical Biochemistry
- Pharmacology Biochemistry
- Nutrition and Toxicological Biochemistry
b) PGD in Biochemistry
6.0 SCHOOL OF PHYSICAL SCIENCES (SOPS)
6.1 DEPARTMENT OF COMPUTER SCIENCE
a) M.Sc. and Ph.D Degrees in Computer
Science.
6.2 DEPARTMENT OF GEOSCIENCES
a) M.Sc. and Ph.D Degrees in
Geosciences with specialization in:
- Geophysics
- Petroleum Geology/Sedimentology
- Hydrogeology
- Environmental Geology
b) PGD Geosciences
6.3 DEPARTMENT OF MATHEMATICS
a) M.Sc. and Ph.D Degrees in
Mathematics with specialization in:
- Industrial and Applied Mathematics
- Differential Equations
- Control Theory
- Elasticity
- Semi-Group Theory
6.4 DEPARTMENT OF STATISTICS
a) M. Sc. and Ph.D Degrees in
Statistics:
- Time Series Analysis
- Econometrics
- Probability Theory
- Multivariate Analysis
- Demography
b) PGD in Statistics
6.5 DEPARTMENT OF PHYSICS
a) M.Sc. and Ph.D Degrees in Physics
with specialization in:
- Solid State Physics
- Materials Science
- Solar Energy Physics
- Space Physics
- Radiation and Health Physics
7.0 SCHOOL OF HEALTH TECHNOLOGY (SOHT)
7.1 DEPARTMENT OF PUBLIC HEALTH
TECHNOLOGY
a) M.Sc and Ph.D in Public Health
Technology with specialization in:
- Environmental Health and Safety Technology
- Epidemiology and Disease Control Technology
- Disease Control Technology
- Health Promotion and Wellness Technology
- Health Economics
b) PGD in Public Health Technology
(PGDPH)
7.2 DEPARTMENT OF BIOMEDICAL TECHNOLOGY
a) M.Sc. Degrees in Physiokinetics and
Biomedical Technology with specialization in:
- Medical Electronics and Instrumentation
- Clinical Engineering
- Rehabilitation Engineering
1) INSTITUTE OF WOMEN/GENDER AND
DEVELOPMENT STUDIES (IWoGDS)
a) PGD with specialization in:
- Women and Gender Studies
- Gender and Entrepreneurship
- Gender and Global Health
- Gender and Agricultural Technology
b) M.Sc Degree Programme
- Gender and Development Studies
- Gender and Science
- Gender and Technology
- Gender and Agricultural Technology
- Gender and Global Health
- Gender and Entrepreneurship
2) PROGRAMMES AVAILABLE AT THE CENTRE
FOR CONTINUING EDUCATION (CCE)
1.0 SCHOOL OF MANAGEMENT TECHNOLOGY
(SMAT)
1.1 DEPARTMENT OF PROJECT MANAGEMENT
TECHNOLOGY (MBA, PGD)
- MBA and PGD in Project Management Technology
1.2 DEPARTMENT OF MANAGEMENT
TECHNOLOGY (MBA, PGD)
- Financial Management Technology
- Management Technology
1.3 DEPARTMENT OF INFORMATION
MANAGEMENT TECHNOLOGY (MBA, PGD)
- MBA and PGD in Information Technology
1.4 DEPARTMENT OF TRANSPORT MANAGEMENT
TECHNOLOGY (MBA, PGD)
- Land Transport Management
- Transport Economics and Planning (MBA only)
- Air Transport Management
- Water Transport Management
3.0 PROGRAMMES AVAILABLE AT THE
INSTITUTE FOR EROSION STUDIES (IES)
a) M.Sc and Ph.D Degrees in Erosion
Studies with option in
- Integrated Watershed Management
- Urban Drainage System and Management
Orje Ishegh-Nor
Registrar, FUTO
Joseph Etim
Joseph Etim (B. Tech) is a blogger, mobile web developer and a tutor with a zeal for positive effects.
Website: Pepetimsblog
Disappointing from futo pg
ReplyDeleteGoogle
ReplyDeleteIf any student need to know about Online Education go to pacific cambria university for higher education .
ReplyDeleteNice to be visiting your blog again, it has been months for me. Well this article that i've been waited for so long. I need this article to complete my assignment in the college, and it has same topic with your article. Thanks, great share. Assam Ration Card Details
ReplyDelete